4 Pieces Windshield Wiper Blades Refills, Diy Adjustable Car Windscreen Wiper Rubber Strips, Frameless Window Boneless Insert Si

Are You Still Struggling With Your Car Wipers Always Not Scraping Clean? Always Making Annoying Noise? Sweetie! It’S Time To Replace Your Wiper Blade Refill! Specifications: – Material: Rubber – Color: Black – Design: Three-Dimensional Layer – Temperature Tolerance: +158F To -40F (+70C To -40C) – Package Include: 4 X Windshield Wiper Blades Refills Rubber Strips How To Install: 1. Raise The Wiper Arm Off Of The Windshield To The Locked Position. (Notice How The Blade Is Held In A Steel Channel & Notice The Blade Has A Little Wiggle Room In The Channel To Slide From End To End ) 2. Find The Notch Where The Channel Is Wider For 1/2 Inch About 1/2 Inch From The Bottom End. Push The Old Blade So It Compresses And The End Of The Blade Is In The Notch And Pull That End Out Of The Channel And The Blade Pulls Right Out. 3. Insert The New Blade All The Way Into The Arm. Then Eyeball The Cut It So It Will Completely Fill The Channel, But You Can Cut It A Little Long At First And Then Make A Few Fine Snips To Get It Right. Make It Tad Short So It Has A Little Wiggle Room. Lower The Arm To Window. Don’T Let It Snap Down Onto The Glass