Dometic A&E Awning Lift Handle

Installation Instructions: 1. Drill Out Rivets Of Existing Handle Using A 3/16” Bit Or Remove Screws. 2. Place New Lift Handle In Punched Slot Of Main Arm And Align Rivet Holes. 3. Insert Rivet Through Hole In Main Arm. 4. Place Hex Nut Over Rivet Shaft And Tight Against Riven Shoulder. If Nut Is Not Used, Rivet Will Not Seat Properly For Securing. 5. Secure Handle By Pulling Rivet Tight With Pop Rivet Gun. 6. Repeat Steps 3-5 On Second Rivet.